in XLR connector for quick connection, while the D 542 has been designed for permanent single hole or screw on installation and comes with a 6 ft. 4 in. 2 m fixed, unterminated cable. The D 542 ST S is mounted on a table stand with an onoff switch and coiled cable with 3 pin XLR connector. AKG D542STS Features PA microphone with rugged, all metal body Frequency response optimized for intelligibility Long useful life even in tough day to day usage Frequency response tailored to speech use AKG D542STS Specifications Polar pattern cardioid Frequency range 150 15,000 Hz Sensitivity 2.2 mVPa 54 dBV Max. SPL 133 dB 1 THD Equivalent noise level 21 dB A Signalnoise ratio A weighted 73 dB Impedance 530 ohms Recommended load impedance 2,000 ohms Connector D 542 unterminated cable ends; D 542 E D 542 ST S 3 pin male XLR Cable D 542 approx. 50 to 100 cm 20 to 40 in. Finish matte grayblack Net weight D 542 275 g 9.6 oz., D 542 E 285 g 10.0 oz., D 542 ST S 805 g 1.8 lbs. Shipping weight D 542 422 g 14.8 oz., D 542 E 334 g 11.7 oz., D 542 ST S 1,125 g 2.5 lbs. The microphone shall be a cardioid dynamic gooseneck microphone. It shall be mounted on a table stand containing an onoff switch. The microphone shall perform to the following specifications frequency range 150 to 15,000 Hz; sensitivity at 1 kHz 2.2 mV; impedance 530 ohms. The table stand shall measure 160 x 120 x 65 mm 6.3 x 4.7 x 2.5 in. and the total weight of the microphone and stand shall be 805 g 1.8 lbs.. The microphone shall be finished in matte gray and black. Get your AKG D542STS today!
Close...
