and LED ONOFF jumper. The DPA connects to any standard mixer input with 9 to 52 V power supply. The mini XLR connector will thread through any hole from 11 mm 0.44 in. in diameter. This eliminates the need for large holes or awkward unsoldering and resoldering of the much larger phantom power adapter during installation. Standard accessory Phantom power adapter The external phantom power adapter of the GN series makes setting up the goosenecks much easier, since a small hole will suffice for threading through a mini XLR connector. Having disconnected the cable, the integrated bass cut can be set quite easily inside the phantom power adapter. The phantom power adapter will operate off any available phantom power supply from 9 to 52 V, powering both the condenser capsule and the LED ring. Available versions GN 15GN 30GN 50 with 3 pin male XLR connector GN 30 OC with stripped and tinned leads Available capsule modules for GN 15GN 30GN 50 CK 31, CK 32, CK 33, CK 47, CK 80. AKG GN15ESP Features Rugged construction Highly reliable contacts for capsule modules Integrated LED ring status indicator Integrated switchable bass rolloff Mini XLR connector or unterminated cable ends AKG GN15ESP Specifications Bass filter 250 Hz, 10 dB at 50 Hz Impedance Recommended load impedance 2,000 ohms Supply voltage 9 to 52 V phantom power to DINIEC Current consumption Connector 3 pin male XLR; GN 30 oc stripped and tinned leads Cable 1.5 m 5 ft. Finish matte dark grey Net weight GN 15 72 g 2.5 oz., GN 30 110 g 3.9 oz., GN 50 120 g 4.2 oz. Shipping weight GN 15 400 g 14.1 oz., GN 30 522 g 18.4 oz., GN 50 495 g 17.5 oz. The installation module shall be a 160305500 mm 6.31220 in. gooseneck with a rugged connecting thread and self cleaning, large gold plated contacts for connection to all D.A.M. Capsule Modules. The installation module shall incorporate an LED ring that may be phantom powered or externally powered. The installation module shall be finished with several layers of nonreflective, dark gray enamel. The installation module shall be provided with a 38 internal thread for permanent installation. The installation module shall be supplied with an in line XLR phantom power adapter DPA with a 1.5 m cable terminated in a mini XLR connector. The DPA shall incorporate a jumper selectable highpass filter and LED ring. Also supplied with the installation module shall be a s
Close...
