from your computer. The built in low noise Phono preamp circuit is highly accurate and precisely conforms to the RIAA standard. The Line Output jacks are always connected to the input preamps signal for source monitoring.Housed in an all aluminum black anodized case, the USB Phono Plus can be powered by either an external power source or directly off the USB port so remote recording is a snap. Optical TOSLINK inputs and outputs as well as SPDIF inputs let you use the USB Phono Plus as a digital audio to USB interface as well. The USB Phono Plus is fully compliant with the USB 1.1 specification and uses USB adaptive mode for playback and USB asynchronous mode for record. It will work with the USB audio device drivers built into Windows 98SEME2000XP or Macs with native USB support OS9.1 or greater or OSX. No special drivers are needed.Frequency Response 10Hz 50KHz, .5dB THD .01 Typical 1KHz Hum and Noise 90dB below clipping Input Impedance 47k Ohms100pF phono 270k Ohm line Maximum Input Level 40mVrms 1KHz phono, 19dBu line Maximum Gain 45dB 1KHz phono, 6dB line Analog Output Connections RCA preamp line output, 18 USB monitorheadphone output Maximum Output Level 6dBu 1.4Vrms Filter TypeResponse Switchable, High Pass, 3dB 22Hz AD & DA 16 bit, 44.1KHz or 48KHz USB selectable Digital Audio Interface TOSLINK in and out, SPDIF coax RCA in Computer Interface USB 1.1 compliant, Windows 98SEME2000XP or newer
Close...
