RCA line level inputs, plus powerful 4 band music EQ. All channels have 3 colour bar meter and gain control, EQ on switch and 60mm fader. CH 3 6 have X fade assign section Stereo Mix OutputsBalanced mix outputs on XLR with level control, plus secondary RCA music only outputs for recording. A post fade TRS mono sum output is also provided. The mix signal is displayed on 12 segment 3 colour bar meters Auxiliary SendAll channels have a stereo auxiliary send which can be individually switched pre or post fade. There is also a post crossfader send to this stereo aux, so a program feed to a zone is possible. The outputs are TRS jacks 4 Band EQPowerful 4 band EQ with asymmetric characteristic on CH 3 6; 6dB boost to preserve headroom and 26dB cut for creative mixing. CH 1&2 have corrective EQ for mic & line control. EQ on switches are provided VCA Cross FaderConductive plastic, high quality 45mm Penny & Giles fader with curve switchable to cut or dip. Channels 3 6 can be assigned to X left side or Y right side, with green yellow led indication. The fader is a VCA design, so wear and tear does not affect audio. Drop in replacements. Pan trim control for imbalance Voltage Controlled Filters2 filters 1 for each side of the x fader with choice of High Pass, Band Pass, Low Pass or multiples e.g. notch. Resonance adjusts Q from mild to wild. Sweep controls from 100Hz to 20kHz with blue led on switch Engineer DJs ToolboxHigh powered headphone ou
Close...