Allen Heath GR2 Rackmount Mixer

More...

blanked off to keep things simple for non technical operators. There is a combination of XLRRCA and screw terminal connectors for pre wired or plug and play installation and extensive remote control capability using standard Cat5 cable. 6 MicLine Inputs with EQ Balanced inputs are provided on terminal blocks for convenient pre wiring, with Mic 1 duplicated on XLR for quick plug and play. Each input has selectable 15V phantom power, protected micline pads and gain trimmers. There is a mic priority function for chairman or MC override, and a mic mute. The mic also has dedicated EQ with swept HPF, swept MF and shelving HF. An expander input allows more mics to be added to the mix. 3 or 4 Stereo Music Inputs Music channels are provided on RCA inputs with protected 104 level settings. Micline 56 can be configured as a stereo input providing a 4 mic, 4 stereo line system. Inputs may be configured one at a time, or all together. Paging & Music Priority Override GR2 offers a dedicated paging channel with tailored EQ for speech intelligibility. The source can be configured from Mic 1 andor an external input or alarm message and the zone program is ducked when a page signal is detected. Music 1 may be configured as a priority input for jukebox and pre recorded message override. Mono & Stereo Zone Outputs Outputs are available on both RCA and terminal blocks for pre wiring or plug and play operation. Stereo Zone 1 may be configured for music only or music mics, and mono Zone 2 can be configured for mics, music or music mics. VCAs are provided for ducking, alarm override and remote level control. Zone 1 features a 2 band EQ and a mono switch. Mono Aux Output A versatile output for additional zone, mic expander, paging distribution, sub bass and more is provided on RCA and terminal block connectors. It is configurable as page out, mic mix, follow Zone 1 or Zone 2, and has a switchable 100Hz LPF for sub bass feed. Remote Control The GR2 uses standard RJ45 CAT5 cable for installation. Zone remote allows remote level and source selection for both zones over a single cable. A 10V DC control input is provided for custom wired switches or potentiometer, third party interface or the Allen & Heath PL 12 wall plate. The PL 5 hand held IR controller is available for use with the PL 12. Utility remote allows remote mic priority and mute switching, page selection and alarm override. Configurati
Close...