DrumZa

Audix ADX20i P Clip On Microphone

 

Audix ADX20i P Clip On Microphone

Audix ADX20i P Clip On Microphone

Audix ADX20i P Clip On Microphone

The ADX 20i is a pre polarized condenser microphone designed to handle a wide variety of clip on applications. The ADX20i is sonically superior as well as aesthetically pleasing and is ideally suited for saxophone, trombone, trumpet and other brass instruments. With a smooth uniform response over a frequency range of 40 Hz 20 kHz, the ADX 20i provides a rich, warm sound not typical of microphones this size. It is machined from solid brass and has a low reflective black e coat finish. The ADX 20i
operates on phantom power 9 52 volts with the preamp module provided APS 910. It may be used in battery mode with optional phantom power adapter APS 911. The ADX 20i can be utilized with a wireless system. Depending on the brand of wireless and the connector configuration of the instrument body pack, the ADX 20i connector would need to be modified accordingly. Low noise electronic circuitry, and balanced low impedance output allow for interference free performance even with long cable runs. Specifications Transducer Type Condenser pre polarized Frequency Response 40 Hz 20 kHz Polar Pattern Cardioid Output Impedance 250 Ohms balanced Open Circuit Sensitivity 5.2 mV Equivalent Noise Level 29 dB A weighted Signal to Noise Rati 65 dB ref 1k 1 Pascal Power Requirements 9 52v phantom Maximum SPL 130 dB CableConnector Shielded 6 cable terminating to a miniature 3 pin XLR f Phantom Adapter mini XLR male XLR male Polarity Positive voltage on pin 2 relative to pin 3 of output XLR connector Housing Machined Brass Gooseneck Flexible steel Weight 1.7 oz4.7 grams without cable
Close...
Price:  $149.99
Check Availability

About Audix ADX20i P Clip On Microphone




Audix ADX20i P Clip On Microphone by Guitar Center - Applications. Saxophone. Trombone. Trumpet. Room ambience, recording. Accordion. The miniature Audix ADX-20i-P Clip-On Condenser Microphone is great for professional stage and studio applications. Designed, assembled, and tested by Audix in the USA, the ADX-20i-P clip-on mic is known for its clarity, excellent transient response, resistance to feedback, SPL handling, and ease of operation. Use the Audix clip-on ADX20i-P for miking saxophone and other brass instruments. The ADX-20i-P has a uniformly controlled cardioid polar pattern. This provides excellent isolation and feedback control on stage. You also get natural sound reproduction at very close distances.The Audix ADX-20i-P microphone delivers smooth and accurate response over a frequency range of 80Hz–20kHz, and it is lightweight, compact and simple to use. Housed in an aluminum ring and isolated by means of a rubber shock mount system, the Audix ADX-20i-P comes with the gooseneck clip with spring tension clip (MC-20i) for easy mounting to an instrument's bell. Audix makes a number of optional accessories for the ADX-20iP microphone, so you can use it on a mic stand for a wider variety of applications.The Audix ADX20i-P clip-on mic is designed for use with a microphone cable. The ADX20i-P condenser microphone operates on phantom voltage of 9-52 Volts and is supplied with a phantom power adapter (APS-910), 6' integrated mic cable, gooseneck clip (MC-20i) and carrying pouch.
Close...

Review Audix ADX20i P Clip On Microphone

 Your Rating Your Comments (optional)




Your review will appear on DrumZa after it has been approved. Thank you for your contribution.

Close...
More Audix
More Clip On Microphones
More Audix Clip On Microphones
 Product Name
 Audix ADX20i P Clip On Microphone
Related Products