 | DOD PS125 DFX and FX Power Supply |
| DOD PS125 DFX and FX Power Supply |
 |
Voodoo Lab Pedal Power 2 Power Supply Standard8 completely isolated 9V outputs. Powers PSA, ACA, and Twin Boss pedals. Powers all Line 6 Stompbox Modelers and ToneCore pedals. Powers 18V pedals via optional cable. Adjustable "Sag" emulates dying battery. Courtesy AC jack on the back panel. Hand built in the U.S.A.. |
$169.00 | ||
 |
Sabine NEX Power Power Supply for NEX Series StandardSabine NEX Power Power Supply for NEX Series Standard The NEX-Power can run up to 6 NexFX pedals (each NexFX pedal comes with its own Power Patch Cord). |
$16.99 | ||
 |
Voodoo Lab Pedal Power ISO 5 Power Supply StandardInput IEC connector. 120V 5060Hz North America model. Model and input power are marked on the bottom of unit.. Outputs 5.5x2.1mm barrel connectors center negative. Short circuit protected.. 9VDC 3 100mA. 912VDC 300mA. 18VDC 100mA. Physical 4.9W x 3.4D x 1.8H 124 x 86 x 44 mm. 1 14 |
$109.00 | ||
 |
POWER PAD II Switching Power SupplyThis power supply cycles so far above the range of human hearing that ripple based buzz 60 cycle hum is eliminated. At 1.67 amps of current, Power Pad II will deliver exactly 9 volts every time and can power an unlimited number of pedals. AC and DC power is circuit protected. Includes |
$89.95 | ||
 |
AKG MPA III L XLR Phantom Power SupplyAKG MPA III L XLR Terminated Phantom Power Supply Adapter cable with 3.5 mm (1/8") lockable jack socket and male 3-pin XLR connector. The MPA III L reduces the usual phantom powering voltage (9 to 52-V) supplied by mixing consoles to the operating voltage (9-V max.) of AKG MicroMics. |
$119.99 |
