Furman ACD100 Power Distribution

More...

expensive parallel feeds and related connectors. 100 amp total load Five 20 amp, 120 volt circuits, each with a status indicator Oversized buss bars 4 buss design accommodates 120V or 240V single phase, or 208V three phase power High inrush magnetic circuit breakers Varistor spike and surge protection Compact two rack space package Most economical product of its type The ACD 100 can handle up to 100 amps of incoming power, distributing it to five 20 amp, 120V circuits. Each circuit has a neon status indicator that lights up when its breaker is turned on, and a 20 amp duplex outlet on the rear panel. The circuit breakers used in the ACD 100 are high inrush magnetic types designed specifically for critical data processing and broadcast applications where nuisance tripping cannot be allowed. They have a pulse tolerance of 10 times the rated current, or 200 amperes. This makes them particularly suited for use with power amps and other devices with high reactance loads, since the high pulse tolerance will keep them from tripping falsely at the instant power is applied or on musical peaks. If a breaker should trip, it can be reset as soon as the overload is corrected there is no cool down delay time required. Temperature compensations which affect fuses and inexpensive thermal breakers are not a concern. The breakers are of the highest industrial grade, ULCSA listed, precise in operation and rugged in construction. They may be used as on off switches for the five circuits. T
Close...