internal switching contacts executed in stereo. Gold plated switches No ground loops for hum free sound Stereo operation The buttons What catches the eye when looking at all Lehle Switchers are the large mushroom buttons. The musician presses this button with his foot this activates a momentary switch located inside the switcher via a metal lever. Since button and momentary switch arent mechanically connected, only the button takes the strength of the foots pressure. Theres no pressure on the circuit board. With maximal construction robustness, the manipulation of the button is very low friction with its setting in a special socket. Switching with the highest level of signal loyalty The signal sent from the jack of a guitar or bass is so weak that bad leads, cold soldered connection points or cheap contact materials audibly impair the sound. In order to switch these weak signals without any loss of sound or sound corruption it requires special materials, of which the contacts of these switchers are made.With all Lehle Switchers, the signal is routed via special gold plated relays.This guarantees absolute clear and reliable switching of sensitive signals. Lehle switchers switch in a passive mode Basically, Lehle Switchers route the signal passively without semiconductors in the signal path. The sound of a guitar or bass is mainly created by an interaction of the weak signal of the instrument and a very sensitive amp input.If the signal was enhanced by an
Close...