DrumZa

MOTU Traveler Mk3 FireWire Audio Interface

 

MOTU Traveler Mk3 FireWire Audio Interface

MOTU Traveler Mk3 FireWire Audio Interface

MOTU Traveler Mk3 FireWire Audio Interface

Sturdy, lightweight construction. Compact size. Powered by computer bus power requires a non adapted 6 pin FireWire port. 28 inputs30 outputs at 44.148kHz. Mic inputs, TRS analog, AESEBU, RCA SPDIF, and phones are all handled as separate channels. Four combo jacks provide Hi Z 14" guitar input or low Z XLR mic input with transparent preamps, phantom power, pad, and plenty of gain. Clip protection up to 12dB over zero. Individual 48V phantom power on each mic input. Four 24 bit 192kHz analog
inputs and 8 analog outputs on balancedunbalanced 14" TRS jacks. Digital Precision Trim lets you adjust input gain in 1dB increments on all analog inputs, fine tune the balance, and save and recall multiple trim setups. High resolution recording operate all analog IO at sample rates up to 192kHz. Flexible optical IO allows you to mix and match formats between the two banks 16 channels of ADAT lightpipe, 8 channels of SMUX 96kHz, or two pairs of stereo TOSLink.
Close...
Price:  $849.00
Check Availability

About MOTU Traveler Mk3 FireWire Audio Interface




MOTU Traveler Mk3 FireWire Audio Interface by Sam Ash - Engineered for high end mobile recording applications, the Traveler mk3 delivers four very high quality mic inputs, bus power, optional battery power and DSP driven mixing and effects processing. The Traveler mk3 provides eight channels of pristine 192 kHz analog recording and playback, combined with twenty channels of digital IO in ADAT optical, AESEBU and SPDIF formats. Expand your system by connecting additional MOTU FireWire audio interfaces or the 8pre mic input expander. The Traveler mk3 is equally well suited for studio, stage and remote locations, with or without a computer. As an interface or stand alone mixer, the Traveler mk3 provides 28 separate inputs and 30 separate outputs, including four XLRquarter inch combo micinstrument analog inputs equipped with pre amps, individual 48V phantom power switches and Digital Precision Trim controls conveniently adjusted from the front panel or CueMix FX software. Connect all of your audio instruments and gear, including mics, guitars, synths, keyboards, drum machines and even effects processors. Record, monitor, route and process all of these live inputs using the professional on board CueMix FX digital mixer with no latency and no processor strain on your computer. Apply hardware DSP driven effects processing to inputs, outputs, and busses independent of your host computer. Add Classic Reverb with lengths up to 60 seconds. Further sculpt your sound with 7 band parametric EQ featuring filter types carefully modeled after British analog console EQs. Choose between two forms of compression a conventional compressor and the Leveler, an accurate model of the legendary LA 2A optical compressor that provides vintage, musical automatic gain control. When recording from the four micguitar inputs, the Traveler mk3s signal overload protection gives you an extra 12 dB of headroom above zero with no clipping or harsh artifacts. Features Sturdy lightweight construction ready to travel with you anywhere.
Close...

Review MOTU Traveler Mk3 FireWire Audio Interface

 Your Rating Your Comments (optional)




Your review will appear on DrumZa after it has been approved. Thank you for your contribution.

Close...
More Motu
More Audio Interfaces
More Motu Audio Interfaces
 Product Name
 MOTU Traveler Mk3 FireWire Audio Interface
Related Products