Numark 5000FX Dj Mixer

More...

from 2 different sources. The units on board sampler with 30 seconds of memory and multi effects processing capability gives additional options, including smart loop and BPM synchronization. DJs can also scratch any audio source utilizing the units scratcheffectpitch wheel. Offering superior audio effects and the most accurate BPM display on the market, the Numark 5000FX sets a new standard in tabletop mixers, delivering all the bells and whistles youll ever need in one powerful package. Numark 5000FX Features 12 tabletop configuration 5 input channels with 3 phono, 9 line 3 switchable to phono, and 2 mics Master balanced, unbalanced, XLR, 2 zone and 1 SPDIF outputs Dual Beatkeeper™ units to auto detect BPM from 2 sources BPM alignment of effects and loops Effects processor with interactive scratcheffectpitch wheel Effects include Scratch, Sonar, Chop, Echo, Delay, Filter with Vocal kill PitchKey shift, Distort with Vocoder 18 Second audio buffering for Scratching and Reverse Audio with Bleep effect Onboard sampler with 30 seconds of memory, smart looping, and BPM synchronization Optional rack ears available Numark 5000FX Specifications Inputs Line 10Kohm input impedance; 83mV rms sensitivity for 1.22V output Mic 600 ohm input impedance unbalanced; 1.9mv rms sensitivity for 1.22V output; 200mV rms max input Phono 47Kohm input impedance; 1.3mV rms sensitivity 1KHz for 1.22V output Outputs Line 6.5V rms max Headphone 0.5W into 47 ohm Distortion less than 0.01 Signal to Noise Ratio maximum output JIS A weighted Line Better than 82dB Mic Better than 80dB Phono Better than 72dB Frequency Response Line 20Hz 20KHz ±0.5dB Mic 20Hz 15KHz ±0.5dB Phono ±1dB except for controlled attenuation of 3dB 20Hz to reduce rumble and feedback Channel Equalizer Bass 6 32dB 40Hz Middle 6 32dB 1.35KHz Treble 6 32dB 15KH Channel Kill 80dB at 20Hz 20KHz General Power Consumption 24 Watts typical; 29 Watts with full headphone output Dimensions W x D x H 320mm x 355mm x 100mm Weight 6.1 kgs Sampler The maximum sample length is 36 seconds, total available buffer is 48 seconds, and buffer not used for sampler is used for echo, delay, scratch, reverse, and bleep effects. The sampler will automatically stop recording once the record time exceeds 36 seconds. Get your Numark 5000FX today!
Close...