Peavey TVX 210 EX Bass Guitar Amp

More...

great articulation, tone and clarity. A high frequency level control is part of the crossover so the high frequency output can be tailored to complement any style of playing. A protection circuit has been incorporated into the crossover to help prevent damage to the horn tweeter in the event of overpowering. If the average signal level going to the tweeter exceeds a certain threshold, the protection circuit is engaged. When this occurs, the horn will almost completely stop producing sound, until the signal level is reduced and the circuit disengages. Then the horn tweeter will again produce sound. Please note that this protection circuit is for long term average signal level protection. It is still possible for transients short term peaks to damage the horn. Like our earlier TXF™ series, this enclosure has low frequency vents on the front of the cabinet. This results in better low frequency impact from the enclosure. The 210TVX is a 4 ohm enclosure capable of handling an input power of up to 350 watts. This enclosure can be used alone or with any other bass guitar enclosure from Peavey. Be sure to check the amplifier specifications to verify the minimum impedance rating of the amp used to power this enclosure. Peavey TVX 210 EX Features 175 watts rms continuous at 4 ohms 350 watts program Two 10 inch Sheffield® bass speakers One phenolic dome tweeter w L pad attenuator 30 Hz to 15 kHz Compact, closed back Front ported enclosure Improved crossover for better midrange tone Vents located on front of cabinet Horn tweeter with level control Protection circuit for horn tweeter Peavey TVX 210 EX Specifications Frequency Response, 1 meter on axis, swept sine in anechoic environment 30 Hz to 15 kHz Power Handling 175 W continuous 26.5 V RMS 350 W program Sound Pressure Level, 1 watt, 1 meter in anechoic environment 95 dB 2.0V Transducer Complement 2 x 10 Sheffield® bass guitar speakers 1 x 1 Phenolic dome horn tweeter Box Tuning Frequency 50 Hz Crossover Frequency Internal Passive 3,000 Hz Impedance Nominal 4O Minimum 3.8O Input Connections 1 x 14 phone jack Enclosure Materials and Finish 34 MDF, Tolex® covered with metal corners and an expanded metal grille Dimensions H x W x D 17 x 24.50 x 19.25 43.2 cm x 62.2 cm x 48.9 cm Net Weight 66 lbs. 30.0 kg Get your Peavey TVX 210 EX today!
Close...