Radial Engineering Bassbone Foot Switch

More...

clean signal channels with individual level controls to adjust each instrument as needed. Channel 1 can be used flat or can be enhanced with a choice of two contour curves. Normally, the primary bass is connected to input 1. EQ and primary tone shaping is set at the amplifier for this particular instrument. Input 2 is designed for the 2nd bass and features a very powerful EQ that allows the player to shape the sound of the 2nd bass so that it sounds right with the same EQ settings. Channel 2 controls include instrument level and low, mid and high EQ settings. A toggle footswitch allows the musician to select between inputs 1 & 2. To add versatility, if a player only uses one bass, the toggle selector switch routes input 1 to either channel 1 or channel 2 thus adding a greater degree of performance flexibility with true dual mode control. But wait theres more! The Bassbone also has a boost circuit, Class A of course, for soloing that applies on both channels. This is outfitted with a selector switch that can assign the foot switch to insert an effect loop or insert both the effect loop and the boost circuit. This way, the player could add a bit of boost to his signal with a flanger plus echo at the same time without having to tap dance his way through a bunch of pedals. The Bassbone also incorporates a tuner output and a direct XLR balanced out for the PA system. This allows the musician to use the Bassbone without an amp for small, club gigs. Like all Radial
Close...