 |
|
Transducer Type Roswellite Ribbon. Frequency Response 30Hz – 15,000Hz. Directional Polar Pattern Bidirectional. Output Impedance Transformer, balanced, actual 270 Ω. Polarity Positive pressure on front side of ribbon produces positive voltage on pin 2 relative to pin 3, pin
|
|
$1295.00
|
 |
|
Low tension 50mm long, 2 micron thick aluminum ribbon design. Over 40dB higher gain than most non active ribbon microphones. 10dB pad and Low Cut filter selector switches. Unmatched fast, accurate transient response. 165 dB SPL capability. Figure 8 audio directional pickup pattern.
|
|
$169.99
|
 |
|
High SPL Capabilities. No internal active electronics to overload or produce distortion up to maximum SPL rating. Extremely low residual noise. Ribbon element is not affected by heat or humidity. Absence of high frequency phase distortion. Equal sensitivity from front or back of element.
|
|
$1295.00
|
 |
|
Unique double ribbon microphone transducer. Hypercardioid polar pattern. Extended frequency response. Excellent transparency and transient response. Compact and rugged design. Warm and natural sound. Applications; Instrumental miking such as saxophone, miking of drums toms, hi hat,
|
|
$699.00
|
 |
|
Element; Ribbon. Polar Pattern Figure of eight. Frequency Response 20 18,000Hz. Open Circuit Sensitivity 39dB 11.2 mV re 1V at 1 Pa. Impedance 100 ohms. Maximum Input Sound Level 150dB SPL, 1kHz at 1 T.H.D.. Noise 22dB SPL. Dynamic Range Typical 128dB, 1kHz at Max SPL. Signal To Noise
|
|
$999.00
|