DrumZa

Shure MX395AL Boundary Microphone Bidirec

 

Shure MX395AL Boundary Microphone Bidirec

Shure MX395AL Boundary Microphone Bidirec

Shure MX395AL Boundary Microphone Bidirec

Type Condenser electret bias. Frequency Response 50 17000 Hz. Polar Pattern Omnidirectional. Output Impedance EIA Rated at 150 Ohms 170 Ohms actual. Output Configuration Active balanced. Sensitivity at 1 kHz , open circuit voltage 28 dBVPa 42 mV 1 Pascal94 dB SPL Maximum Sound Pressure Level 1 kHz at 1 THD, 1 kOhms load 114 dB. Equivalent output Noise A weighted 21 dB SPL. Signal to Noise Ratio referenced at 94 dB SPL at 1 kHz 75 dB . Dynamic Range 1 kOhms load at 1 kHz 93 dB . Common Mode Rejection
10 Hz 100 kHz 45 dB minimum. Preamplifier output Clipping level 1 THD 8 dBV 0.4 V. Polarity 3 Pin XLR Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector. . Weight Net 0.30 lbs. 0.136 kg . Logic Connections LED IN Active low ≤1.0V, TTL compatible. Absolute maximum voltage 0.7V to 50V.. Environmental Conditions Operating Temperature 18 57 C 0 135 degrees F; S
Close...
Price:  $179.99
Check Availability

Review Shure MX395AL Boundary Microphone Bidirec

 Your Rating Your Comments (optional)




Your review will appear on DrumZa after it has been approved. Thank you for your contribution.

Close...
More Shure
More Boundary Microphones
More Shure Boundary Microphones
 Product Name
 Shure MX395AL Boundary Microphone Bidirec
Related Products